EXPERTS have come up with four cheap ways you can draught-proof your home to keep the cold air out.
Draughty windows can lead to higher energy bills as cold air can creep in through the gaps, meaning you’ll need to put the heating on more often or have to set the thermostat higher.
2
Before you do anything though you’ll need to identify whether or not draughts are getting in through your windows.
This can be done by looking for cold spots around the window frame and condensation between the panes of glass.
Once you’ve identified which windows need attention, you can set about protecting them.
Install weather stripping
The experts at Checkatrade said: “There are two types of weather stripping to choose from including metal/plastic strips with brushes attached as well as self-adhesive foam strips.
“The latter is cheaper but may not last as long as plastic or metal strips. The key to the installation is to make sure the strip is the right size to fill the gap in your window.
“If it’s too big it will get stuck in the window. If it’s too small then there will still be a gap.”
Weatherstrips can easily and cheaply be purchased from retailers including Screwfix and Amazon.
They can cost as little as £5 but the price will vary depending on how much you need.
Most read in Money
Apply silicone caulk
Caulking simply seals any gaps or cracks and is a just involves filing any areas needed around the window frame.
The experts explained: “This will help to insulate and seal the windows better, preventing them from letting cold air in. There are different types of caulk available, so make sure you check the label to get the right one.
“For example, if you’re caulking a window in a humid room, you will need to buy a caulk that’s mould-resistant and waterproof.”
Before applying any old caulk from the window frame must be removed first.
Use a putty knife if it doesn’t fall away.
Then the surface has to be prepared by removing any dirt and repairing any damage.
The experts advised: “Put the tube into the caulk gun and cut the tip of the tube at a 45 degree angle.
“Press the tip against the window firmly and apply the caulk in a continuous bead, do this on all sides. Smooth over the sealant and remove any excess, you can use a rag over your finger for this before letting it dry.”
Caulk can cost as little as £1 and is available in stores such as Wickes, Screwfix and Toolstation.
Add window insulation film
Around 18 per cent of the total heat lost in a home is through the windows, according to Safestyle UK and insulation film can help reduce that.
Before applying, clean your windows and surrounding area before making sure the windows are locked then apply the tape to the window frames.
The experts advised: “The tape will need to be in a straight line and on the edge of all of the frames. Rub down the tape to make sure it’s secure and then remove the backing.
“Take out the window film and start attaching it to the tape from the top down, trim the excess tape off and use a hairdryer to shrink the film and remove the wrinkles.
“If you don’t have experience, or it comes unstuck, then we recommend hiring a professional to make sure it’s installed properly.”
Window insulation film can be bought for as little as £5 from places like Wickes, although the price will vary depending on how much is needed.
Add insulated curtains or drapes
Getting thick curtains is a great way not only to keep the heat inside during the winter but also to keep the heat out during the hot summer months.
Over the winter months, the experts advise to keep them shut when the sun sets and open during the daylight hours to make the most of the sun, if there is any.
The experts at Checkatrade said: “Not only are they functional, but they can be stylish too and match your decor. Plus, it can give you some much-needed privacy.”
The pros warned though: “If you’re going to attempt to draught-proof your windows yourself then you need to make sure you’re sealing them correctly.
“If you get it wrong, you could end up with some expensive issue. Windows that aren’t sealed correctly can cause water damage, mould growth and will still continue to have a draught – which defeats the object in the first place.”
2
